How to Disable HowToDisable
Related Articles
If you are a new-car buyer, you can request the dealer to remove the GPS tracking device from your car. If you are a used car buyer, you must find and remove the device from your car yourself. Some of these devices are built into your car and are not easily identifiable. To disable this device, you must remove the fuse or signal jammer. If you have a plug-in device, you can use aluminum foil or a signal jammer to block the signals.
Also read: How to Disable Transponder Key Systems Without Key
The signal jammer
Using a Signal jammer to disable vehicle gpS tracking may be a great way to stop a car from being tracked by a GPS system. Jammers work by interfering with radio signals. These devices are generally designed for high-grade military purposes. If used improperly, they may result in fines of thousands of dollars and imprisonment. The FCC has a page dedicated to jammer enforcement.
A GPS jammer blocks the GPS signal from being absorbed by GPS receivers. It interferes with the functionality of a GPS receiver. However, the Geotab GO device continues to send the vehicle’s data. As such, the company has dedicated itself to developing a tamper-proof system and offering a jamming device that works in conjunction with GPS. It will be difficult to detect a jammer, as the device will display an error message that says ‘no GPS signal’.
Learn more about: How to Disable Steering Wheel lock
Aluminum foil
Did you know that you can block GPS signals with aluminum foil? You can use it to hide your cell phone or disable vehicle GPS tracking. If your car is equipped with this type of technology, then you must know how to block it with aluminum foil. Here are some tips to do so. First, wrap it tightly around your phone. This will create a barrier that prevents the GPS tracking system from being able to detect it.
Another simple way to block vehicle GPS tracking is to wrap the device in aluminum foil. Its attenuation ability is high and the foil does not need to be very thick. Just make sure that you wrap it around the phone tightly, and that there are no gaps or holes. Then, you can turn it off. The foil will block the GPS signal from coming through the phone, and it will no longer be detectable by the device.
Hardwired GPS trackers
When you suspect that your vehicle is being tracked, the first step is to locate the tracker. If it is battery operated, you can unplug it and take it out of the car. If it is hardwired, however, you may have to cut the wires. The process is relatively straightforward, but if you find that the tracking device is inaccessible, you may want to seek professional help.
You may also want to consider a hardwired device. This technology is a great choice for some vehicles. Many of these devices have a kill switch so that you can disable them from starting the vehicle. This is convenient, and it provides a detailed report every minute of the vehicle’s movement. Unlike battery-powered devices, the CarLock Portable device does not require installation, and it connects to a smartphone app, so you can monitor its location and even disable its starter remotely.
Plug-in trackers
Disabling vehicle GPS tracking using plug-in trackers is easier than you might think. These small devices plug into the vehicle’s data connector, located under the dash near the driver’s legs. You can use a flashlight and a mirror to check under the car’s seat, glove compartment, and center console to find the tracker. These small devices are typically battery-powered and can be hidden in many locations.
There are two main types of plug-in trackers, namely magnetic and plug-in. The magnetic ones require installation and are the most vulnerable. However, plug-in trackers can easily be removed. Plug-in trackers can be easily disabled because they plug into the vehicle’s OBD port and send alerts when they are disconnected. However, if you are concerned about the safety of your vehicle, you may want to opt for the latter.
Plug-in trackers with future location starter
When you install a GPS tracking system in your car, you may wonder how to disable vehicle gps tracking. The answer is simple. You need to hardwire your GPS tracker to your vehicle, which requires the installation of a relay switch. You can either do this yourself or contact a professional installation team. An installation team will know the best places to mount the tracking device and how to properly hardwire it to your car’s 12-volt power system.
The plug-in trackers are easy to install. To install, you simply need to find the OBD-II port. The location varies from vehicle to car, but it’s generally underneath the dashboard. Once you’ve located the OBD-II port, install the tracker into it. Then, you’re all set! You’ll soon begin to receive data from your vehicle.
