If you’re having trouble using your HP laptop’s touch screen, you can disable it. To do this, first open Device Manager. Then, navigate to the Control Panel and select the “Accessibility” tab. You can then disable or enable the touch screen. If you want to enable the touch screen, follow the steps listed below. You may also want to try running MiniTool Partition Wizard to disable the screen.
Related: How to Disable Touch Screen on Chromebook
Disabling touch screen in Windows 10
If you’re having trouble using your HP touch screen on your Windows 10 laptop, there are a few ways you can disable it. First, open up the device manager and search for the touch screen device. You’ll find it under Human Interface Devices. Once you’ve found it, right-click it and select Disable Device. Next, confirm that you want to disable the device. If that still doesn’t work, try uninstalling some of your recent programs or moving the laptop to another room.
Once you’ve found the right option, open Device Manager and click on the Human Interface Devices tab. Right-click the Touch Screen device and click on Disable. Click on the Enable/Disable option. After that, click OK. This should disable the touch screen device on your HP laptop. You can try disabling the touch screen again later by selecting the same command. If you get an error message, restart the PC and try again.
Alternatively, you can disable multi-touch gestures from the Control Panel. Navigate to the Touch tab and click the Pen and Touch option. You’ll see an Enable multi-touch gestures and inking option. Uncheck the box to disable the feature and enable it again if you’re in a hurry. If all else fails, you can also turn off the touch screen in Device Manager.
Read more: How to Disable Touchpad on an ASUS Windows 10 Laptop
Disabling touch screen in Windows 10 via Windows Terminal
You may be wondering how to disable the touch screen on HP laptop in Windows 10. To do this, open Device Manager and locate the driver for your HP touchscreen. Select it and select Disable Device. Click on the “Disable Device” option. If you see more than one driver for the touch screen, disable each driver one by one. Finally, reboot your HP laptop to make the changes take effect.
To disable the touch screen, open the Device Manager and locate the HID-compliant touch screen. Click the “Disable device” option, and then click “Yes.” A pop-up window will appear confirming the change. After a few minutes, you should see the HID-compliant touch screen again. The arrow will be pointing downwards. Restart your PC to see the changes.
Once the touchscreen has been disabled, it will no longer respond to your commands. You can then re-enable the touchscreen in Windows by following the steps outlined above. To restore the touchscreen, go back to step 6 and unclick the “Disable device” button. The touchscreen will be enabled again. This method works for any HID-compliant touch screen device. You must make sure to run Windows PowerShell as an administrator before proceeding.
Learn more: How to Disable Keyboard Shortcuts in Windows 10
Disabling touch screen in Windows 10 via MiniTool Partition Wizard
After you have installed Windows 10 and made a bootable USB flash drive, you should open Device Manager. You can use the device manager to enable and disable your touchscreen. To disable the touchscreen, right-click on the touchscreen in Device Manager. You should set the Base to Hexadecimal and the Value data to 0. Setting the Value Data to 1 will re-enable your touchscreen. You can also delete the TouchGate value, if you no longer wish to use it.
If you don’t want to lose your data, you can simply turn off the touchscreen in Windows 10. Then, open Device Manager and click the “Touch Screen” tab. You can then disable your touchscreen, saving power and fixing sensitivity issues. The MiniTool Partition Wizard will give you detailed instructions on how to perform the procedure. However, you should note that it is possible to disable the touch screen on HP laptops running Windows 7 and ChromeOS as well.
You can also disable the touch screen on HP laptops in Windows 10 by selecting the “HID-compliant” touch screen in Device Manager. After you have disabled the touch screen, you can enable it again using the same steps. After doing so, make sure to restart your HP laptop in Windows 10 to see the changes. It may take a few attempts to disable the touch screen, but once you have successfully done so, you’ll be happy you did.