How to Disable HowToDisable
Related Articles
If you’ve ever wished you could disable the onguard collision safety system in your car, here’s how to do it safely. The OnGuard system uses a mono-pulse radar sensor to detect fixed and moving objects up to 500 feet away. It provides warnings through audible, visual, and haptic signals, but it’s important to remember that these systems are not a substitute for safe driving and conscientious behavior.
Related: How to Disable a Governor on a Truck
OnGuard’s mono-pulse radar sensor detects moving and fixed objects at distances up to 500 ft. away
The sensor is resistant to high and low-temperature fluctuations, heavy rain, humidity, and strong wind, and can be placed inside special fiberglass enclosures. The sensor’s sensitivity thresholds can be adjusted to ignore harsh ambient conditions. The antennae define beam patterns. This allows it to detect stationary and moving objects. The mono-pulse sensor detects moving and fixed objects up to 500 feet away.
OnGuard’s mono-pulsse radar sensor can detect both moving and stationary objects up to 500 feet away. It is fully integrated with the joint venture’s anti-lock braking system and stability control system, allowing the customer to combine these safety systems. The system uses a SAE J1939 data network to coordinate its responses. The system provides feedback to the driver through an in-cab display and a progressive audible alert.
The sensor uses the delta and sum signals to detect both moving and fixed objects. Each feedhorn creates a signal with a delta phase shift equal to 0 degrees or 180 degrees. A calibration signal is injected into the receive path when the radar is idle and determines the phase shift between different microwave signals. This signal will be used to determine the accuracy of the sensor’s readings.
Read more: How to Disable Speed Governor in 2010 Ford F150
It provides audible, visual and haptic warnings
OnGuard’s radar-based activity system monitors for stationary and moving objects in front of your vehicle. If it senses a rear-end collision, OnGuard applies brakes to avoid a potential collision. The system also monitors road conditions and helps prevent accidents by helping you brake in time. This innovative safety system reduces rear-end collisions by as much as 87 percent and has increased uptime.
The OnGuard collision safety system provides audible, visual, haptic warnings when an impending collision is detected. Its advanced technology is compatible with many vehicles, including large trucks and semi-trucks. The system also offers adaptive cruise control, which helps you maintain a constant speed without crashing. Its advanced technology can help prevent rear-end collisions by detecting objects ahead and measuring your position in relation to other vehicles.
OnGuard’s lane departure warning system can alert you when you begin to weave across your lane. When the system detects that you are weaving within your lane, the vehicle will emit an audible warning to alert you. This system also uses camera-mounted sensors to determine your position within your lane. When the vehicle is crossing lane markings without using your turn signal, it will issue a visual and audible warning.
Learn also: How to Disable an Electronic Parking Brake
It is not a substitute for a safe conscientious driver
The OnGuard Collision Safety System (CMS) is a collision mitigation and active braking system that monitors distance, speed, and deceleration ahead of your vehicle. When it detects an impending rear-end collision, it will immediately dethrottle your engine and apply up to 50% of your brake pressure. Although this technology is useful, it cannot completely replace a safe and conscientious driver.
OnGuard can be disabled in the engine ECM or ABS system. The driver should remain attentive and aware of road conditions, other drivers, and other factors when driving. If you have been driving in an unsafe manner, the system may not detect the lane departure. If you fail to follow all of these safety measures, you can end up in an accident and injure yourself or others, or cause serious property damage.
The OnGuard ACC does not compensate for drivers who are distracted or impaired. It only brakes the lead vehicle in front of your vehicle. In addition, it does not function below 15 mph. OnGuard CMS is easy to operate, thanks to the display unit. The controls are easy to reach and navigate through; the display shows the speed of approaching vehicles and provides visual and audible warnings. The user can choose from the menu options by pressing the MODE button.
